- 1 - 20 of 163 SEARCH RESULTS FOR
- products (163)
- video (95)
Item #30537 Tube Straightner
The quick & easy way to straighten metal brake or fuel line tubing.* Straightens coiled, or bent lines* Works on steel, stainless, copper, and aluminum* Great for brake lines, fuel lines and more* Easy to use* Available in many popular sizes * Saves time and money An Eastwood exclusive, this…
Straighten coils of tube quickly and easily with the BQ1028 Tube Straightener. This tube will make your next custom tube job look like it was a factory replacement. It is critical that any tube bending operation begin with a straight tube. This will free you up to match the exact bends of your…
Straighten hard metal lines with just a simple squeeze, on or off the vehicle* Straighten1/4 in and 3/16 in brake lines* Works with mild steel, stainless steel and other metals* Compact for easy on car and under car use* Designed with maximum leverage to work one handed* Radiused jaws for bending…
Increase the capabilities of your bead roller with more forming dies. * Fits most bead rollers with 7/8 in or 22mm shafts* Includes 9 steel dies and 1 polyurethane lower wheel* Hem edges, create offsets and flanges, form style lines, contours and channels* Dies are machined out of CR12 steel with a…
Eastwood's Fender Roller won't let your fender ruin expensive tires on lowered vehicles!* Professional grade high quality tool for years of service * Durable powder coated finish* Delrin® ball-bearing fender-former wheel* Fender former eliminates tire rub by increasing tire-to-fender clearance*…
More Trim Straightening Solutions - The Trim Anvil with Stand (13336) is contoured to suit many trim forming needs. Includes conical and pyramid tapered horns and square flat center. Measures 5-1/4" long by 1" wide by 2-7/8" tall, weighs 8 ounces. The Repuse Hammer (28241) features a 11/16" ball…
Use this Polyurethane Lower Die for existing forming dies or as a replacement for a highly used die for your Eastwood Bead Roller Forming Dies.
A longer and larger flange mount to allow the 31158 Eastwood Fender Roller to be used on trucks and cars with larger (5" to 6") 5 & 6 lug bolt patterns and up to a 4.25" center hub. Simply remove two bolts from the 31158 Eastwood Fender Roller, switch to the Truck Adapter, replace the bolts and go.
This drive roller fits the Eastwood MIG175 Welder and is a knurled replacement for the original drive roller. This roller has one knurled groove side for 0.023Inch (0.6mm) and one knurled side for 0.030 Inch (0.8mm) to 0.035Inch
Keep it Straight - Create perfectly straight beads and offsets with infinite adjustment from the edge, up to 12” deep, in your panel. * Easy-on, easy-off 2 bolt attachment - allows quick adjustment during forming* Works with Eastwoods #28187 bead roller – and competitors with ½” plate frame designs*…
This is the replacement adjustment screw, or threaded rod, moves the fender roller out to apply force onto the fender lip. Turn only one quarter turn at a time. Over tightening, or aggressive rolling could cause personal injury or property damage. This threaded rod is designed to break when too much…
Replacement drive roller for the Mig 250. This would be utilized if the original drive roller is damaged or lost. 0.023 and 0.030 wire
Replacement drive roller for the Mig 250. This would be utilized if the original drive roller is damaged or lost. 0.035 and 0.045 wire
This 1-1/8" hardwood roller is used to help conform Thermo-Coustic or Dynamat to irregular surfaces, and helps assure complete adhesion.
The X Mat Application roller is a must for any sound and/or heat abatement with an adhesive backing. Can be used to contour and flatten the mat as well as get into hard to reach areas and apply an even load distributing the adhesive and the mat. The roller is constructed of a durable urethane held…
With a little practice, these hardened steel louver dies, and the Eastwood Bead Roller (28187) you'll be able to produce professional looking louvers.* Produces 3/4" wide by 3/16" high louvers* Works on up to 18 gauge steel and 14 gauge aluminum* Multiple passes allow the hardened steel louver dies…
Replacement drive roller for the Mig 135 (12011). This would be utilized if the original drive roller is damaged or the set screw threads are damaged.
This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023 Inch (0.6mm) solid wire and one knurled side for 0.030 Inch (0.8mm) to 0.035 Inch (0.9mm) flux cored wire. This drive roller is for the Eastwood…
Replacement drive roller for the MIG 135 (12011). This would be utilized if the original drive roller is damaged or the set screw threads are damaged. This drive roller is for the Eastwood MIG135 with the Key Way style drive roller mount.
Eastwood's exclusive Fender-Rolling Tool and Fender Finisher Kit won't let your fender ruin expensive tires on lowered vehicles First use the Roller to easily and quickly “roll” the entire inner lip on a wheel opening to increase fender/tire clearance. Then use the Fender Finisher™ for the final…