Mig Welder Parts
- 1 - 18 of 18
- products (18)
- video (17)
This drive roller fits the Eastwood MIG175 Welder and is a knurled replacement for the original drive roller. This roller has one knurled groove side for 0.023Inch (0.6mm) and one knurled side for 0.030 Inch (0.8mm) to 0.035Inch
Contains all the consumables needed to service the Eastwood MIG 250 welder. 5 different tip sizes, 2 nozzles, 2 insulators and 2 tip holders.
This Eastwood Spool gun fits the Eastwood MIG135, MIG175 and the MIG250 Welders. It comes complete with a 2 LB Spool of .030 inch aluminum wire. For use on machines with a metal Plug on the machine and torch lead.
This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023" (0.6mm) solid wire and one knurled side for 0.030" (0.8mm) to 0.035" (0.9mm) flux cored wire.
This is a replacement gas diffuser for Eastwood MIG 135 and 175 welders.
Consumables Kit for your MIG Welder* 2 Gas Nozzles* 20 Contact Tips (ten 0.023"/0.6mm and ten 0.030"/0.8mm)* Plastic Storage Case Kit includes a complete set of consumables for your Eastwood MIG135 or MIG175 Welder or any other MIG welder with a Tweco-style torch.
Replacement nozzle for the Mig135 (12011)and Mig175(12012) welders. The nozzle may become damaged over time with spatter and this will replace the defective unit and assure proper shielding gas flow
This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023 Inch (0.6mm) solid wire and one knurled side for 0.030 Inch (0.8mm) to 0.035 Inch (0.9mm) flux cored wire. This drive roller is for the Eastwood…
This 56 inch long welder gas hose uses a 5/8 Inch x 18 male thread for the most common welders and gas regulators. Replace your warn or missing hose with the Eastwood Welder Gas Hose.
1lb 0.030" 4043 Aluminum Filler Wire Spool. 4043 is a great choice for the welding of heat-treatable base aluminum alloys and more specifically the 6000 series alloys. Fits the Eastwood MIG175 Spool Gun, as well as any other MIG welder that utilizes a 4in spool.
Replacement ground cable for all of the following Eastwood welders and plasma cutters. TIG200ACDC and DC, Versa-Cut 20, 40 and 60.
Replacement 200 amp ground cablewith bolt on style with ground clamp for Eastwood MIG 135 and 175 Welders.
This Spot Weld Nozzle is designed to fit your Eastwood MIG250 (20279) welder and A2/24 Binzel style torch. It keeps the correct electrode distance off the work piece for making spot welds.
This is a replacement Ground Cable for the Eastwood MIG250. Dinse 35 connector
Replacement drive roller for the MIG 135 (12011). This would be utilized if the original drive roller is damaged or the set screw threads are damaged. This drive roller is for the Eastwood MIG135 with the Key Way style drive roller mount.
…product that you have to try to believe how well it works! We held onto a small metal panel while a torch heated the metal almost white hot. The part in my fingers never went above about 85 degreesF! That's the kind of protection Cold Shield provides. Imagine how well Cold Shield will work for you…
This Spot Weld Nozzle is designed to fit your Eastwood MIG welder and any other welder with a Tweco style torch. It keeps the correct electrode distance off the work piece for making spot welds. This nozzle is included in the Spot Weld Kit 13901.
Spot Welding in the past had primarily been done by large resistance welders but can now be achieved with your TIG welder and the Eastwood Spot Welding Kit. Spot welding is accomplished by clamping two panels together and fusing them with a number of welds sequentially-placed rather than a…