- 1 - 13 of 13
- products (13)
- video (4)
It's a Flanger, and a 3/16 Punch, all in one handy pneumatic tool...and it's Eastwood priced for the DIYer! This 2 in 1 pneumatic tool easily punches holes and flanges edges in sheet metal for creating and installing patch panels, replacement panels, or custom sheet metal work. The double action…
It's a 5/16" Punch, and a Flanger, in one pistol-grip pneumatic toolDouble-action head swivels to let you create flanges and holes from any angle with just a squeeze of the pistol grip.* Ergonomic pistol grip* Punch 5/16"-dia. holes* Produce 0.040" offset flanges* Requires 4 cfm at 90 psi
…beveled flange* Works great on 20 to 18 gauge* Proper weld-prepped edges allow strong, flush, crack-free welds in sheet metal* The convenient hole punch feature provides clean, burr-free 0.19” holes A must for the beginning welder and professional alike. Minimizes blow through and warpage when…
…uniformly and quickly. Crimper forms a step around the area to be repaired, so that you can place the patch on flange of that step, flush with the original panel surface. You'll need your own pneumatic air chisel. * Full-grip handle for safety* 0.401" Parker shank pneumatic chisel* 7˝ overall length
The Eastwood PERFECT PANEL PREP TOOL® is an exclusive, patent pending, design provides a perfectly beveled 45° weld-prepped edge in 20 or 18 Gauge sheet metal to achieve solid, full-penetration MIG or TIG butt welds.* Each strike forms a perfect 0.062” x 45° beveled flange* Works great in 22 to 18…
It's a Flanger, and a 7/32" Punch, in one handy pneumatic tool* Produce 0.040" offset flanges* Punch 7/32" diameter holes* Requires 4 cfm at 90 psi Double-action head swivels to let you create flanges and holes from any angle with just a squeeze of the handle.
Hinge Pin Driver helps you install or remove center pins in door hinges. Unique design of this hinge pin driver allows access to car door hinge pins, which most straight punches can't do due to tight clearances. * Connects to your air hammer with .401" taper shank* 0.237" in dia. * 7-3/8" long
It's a 5/16" Punch, and a Flanger, in one handy pneumatic toolDouble-action head swivels to let you create flanges and holes from any angle with just a squeeze of the handle.* Punch 5/16"-dia. holes* Produce 0.040" offset flanges* Requires 4 cfm at 90 psi
Ingersoll Rand Short-Barrel Air Hammer delivers MAX comfort, power and productivity - IR122MAXIngersoll Rand's Short-Barrel Pneumatic Hammer delivers the punch you need for exhaust and front-end jobs, general bolt cutting, pin driving and body shearing work. Gets the job done fast and comfortably!…
This kit is deisgned to replace the punch and die in Eastwood's Pneumatic Nibber 30072. Includes all parts nessasary to rebuild the cutting head of the tool.
Ingersoll-Rand Standard-Duty Air Hammer Kit pounds away at up to 3500 blows per minute...includes 5 assorted chisels - IR116K Economical pneumatic hammer from Ingersoll-Rand gives you fast cutting action, especially for standard-duty work on exhaust systems, panel cutting, and general repair work.…
…end work. This air hammer is a super-duty tool that produces up to 3000 blows per minute, and has an alloyed steel barrel and heat-treated piston for longer life. Built-in power regulator and trigger control. ACCESSORIES INCLUDED in this kit: 3/4" flat blade chisel, punch chisel, claw ripper-edging…
…bolt cutting, and front end work. This air hammer produces up to 2000 blows per minute, and has an alloyed steel barrel and heat-treated piston for longer life. Built-in power regulator and trigger control. ACCESSORIES INCLUDED in this kit: punch chisel, edging tool, tail pipe cutter, 3/4"-wide…